LM series vertical roller mill can be widely used in such industries as cement, power, metallurgy, chemical industry, non-metallic mineral. It is used to grind granular and powdered materials into powder with required fineness.
Technical Advantages:
1. Low run cost
2. Low invest cost
3. High drying ability
4. Stable quality
5. Easy to operate, reliable performance
6. Convenient to maintain
7. Environmental protection
Working princeple Of Vertical Roller Mill
Vertical Roller Mill's motor runs under the condition that speed reducer drives the Nether millstone. The materials fall into the center of device through lock air feeder, and hot air comes into mill through air inlet. Under the function of centrifugal force, the materials move to the edge of the Nether millstone as it runs and rollers will grind the materials when they come by the annular chute. The grinded materials will be taken up by air circulation and the bigger powders will fall down for regrinding. Qualified powders will be collected by collecting device as to be final product. Materials containing water will be dried when they contact with the hot air. Different humidity materials can be dried to the requirement through adjusting the temperature of hot air. Adjusting the separator can get the required fineness powders. Technical Data:
LM Vertical Ore Mill Specification
| Model | LM130K | LM150K | LM170K | LM190K | LM220K | LM240K | |
| Turnplate diameter (mm) | 1300 | 1500 | 1700 | 1900 | 2200 | 2400 | |
| Capacity (t/h) | 10~30 | 13~40 | 18~57 | 23~72 | 36~114 | 41~128 | |
| Final product size | μm | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 |
| mesh | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | |
| Final product water percentage | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | |
| Max. input size (mm) | <38 | <40 | <42 | <45 | <50 | <55 | |
| Best water percentage of raw material | <4% | <4% | <4% | <4% | <4% | <4% | |
| Drying needed if water percentage is more than | <15% | <15% | <15% | <15% | <15% | <15% | |
| Input wind temperature (℃) | <350 | <350 | <350 | <350 | <350 | <350 | |
| Output wind temperature (℃) | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | |
| Main motor power (KW) | 185~220 | 250~280 | 355~400 | 450~500 | 710~800 | 800~900 | |
| Overall dimension | L mm | 3500 | 4200 | 4700 | 8500 | 10200 | 11700 |
| W mm | 3400 | 3900 | 4500 | 5600 | 6700 | 7700 | |
| H mm | 5800 | 7100 | 8300 | 8800 | 10600 | 12200 | |
| Weight (t) | 48 | 75 | 90 | 100 | 125 | 160 | |
LM Vertical Coal Mill Specification
| Model | LM130M | LM150M | LM170M | LM190M | LM220M | LM240M | |
| Turnplate diameter (mm) | 1300 | 1500 | 1700 | 1900 | 2200 | 2400 | |
| Capacity (t/h) | 10~15 | 16~22 | 20~28 | 26~35 | 35~45 | 40~50 | |
| Coal powder fineness (R0.08) | <15% | <15% | <15% | <15% | <15% | <15% | |
| Coal powder water percentage | <1% | <1% | <1% | <1% | <1% | <1% | |
| Max. input size (mm) | <38 | <40 | <42 | <45 | <50 | <55 | |
| Input material water percentage | <15% | <15% | <15% | <15% | <15% | <15% | |
| Input wind temperature (℃) | <350 | <350 | <350 | <350 | <350 | <350 | |
| Output wind temperature (℃) | 75~95 | 75~95 | 75~95 | 75~95 | 75~95 | 75~95 | |
| Raw coal Hardgrove grindability index (HGI) | >55 | >55 | >55 | >55 | >55 | >55 | |
| Main motor power (KW) | 185 | 250 | 315 | 400 | 500 | 560 | |
| Overall dimension | L mm | 3500 | 4200 | 4700 | 8500 | 10200 | 11700 |
| W mm | 3400 | 3900 | 4500 | 5600 | 6700 | 7700 | |
| H mm | 5800 | 7100 | 8300 | 8800 | 10600 | 12200 | |
| Weight (t) | 46 | 75 | 94 | 100 | 122 | 157 | |
If you are interested in the machine, you can fill the form and submit it to us! We will offer best service for you!